Check My Heat Pump Rebate
Product Knowledge

Register the rebate before the install: a BC heat pump checklist

Oct 7, 2026·5 min read

The mistake that costs the most It is the most expensive mistake in the whole heat pump process, and it has nothing to do with the equipment. A homeowner picks a system, gets it installed, and then applies for the rebate — only to learn that the program required pre-registration, or an energy audit, before […]

Register the rebate before the install: a BC heat pump checklist

The mistake that costs the most

It is the most expensive mistake in the whole heat pump process, and it has nothing to do with the equipment. A homeowner picks a system, gets it installed, and then applies for the rebate — only to learn that the program required pre-registration, or an energy audit, before the install. The equipment is in, the money is spent, and the rebate is gone.

This happens more often than it should, because the order of operations is not obvious. The rebate is not a discount you claim after the fact. For several BC and federal programs, it is a process you join before the work starts. Get the order right and the money is there. Get it backwards and it is not.

Here is the order we walk every homeowner through.

Step 1: work out what you are replacing

The first question is what heats your home today, because the rebate depends on it. The BC base amount varies by current heating: electric heat gets $2,000, oil gets $2,000, gas gets $1,000, and replacing an old heat pump gets $500. That is the starting point, before any top-up.

This is also the point where people are surprised. Oil heat, which many assume is the worst case, carries one of the highest combined rebates — because the programs are designed to move homes off oil. Gas, which feels like the safe middle, carries the lowest BC base. Knowing your starting point changes the number by thousands, so it is worth getting right before anything else.

Step 2: check your income band

The second question is household income, because the top-up depends on it. The bands in the estimate are straightforward: under $87,000, between $87,000 and $140,000, or over $140,000. The low band adds $7,500 on top of the BC base. The middle band adds $1,500. The high band adds nothing.

Two things to know here. First, the BC total is capped at $9,500, so the top-up and the base together cannot exceed that. Second, income-qualified programs in BC use household-size thresholds, so the band that applies to your household is verified during the assessment — the bands in the estimate are simplified, and your exact tier is confirmed before you commit to anything.

Step 3: check the federal side, and the home type

The federal amount depends on the same two answers, plus the home type. For low-income households, the federal amount is $5,000. Otherwise it is $7,500 for oil, $5,000 for electric, and $2,500 for gas or an old heat pump. If the home is a condo or apartment, the federal amount is capped at $2,500 regardless.

Then there is the municipal or utility top-up: $500 for a detached house or duplex, $250 for other home types. It is the smallest number in the stack, but it is also the easiest to forget, and it is real money.

Put together, the highest combined figure in the model is $11,500: an oil-heated detached house, middle income band, with the BC amount of $3,500, the federal amount of $7,500, and the $500 top-up. That is a planning figure, not a promise — but it shows why the order matters. Every piece of it depends on answers given before the install.

Step 4: register, or book the audit, before the install

This is the step people skip, and it is the step that protects the money. Several programs require pre-registration, and some require an energy audit, before any equipment goes in. The exact requirement depends on the program, and it can change — which is why the checklist matters more than any single rule you might have read last year.

The practical way to handle it: before you sign an install contract, confirm in writing which programs you are applying to and what each one requires first. If a program needs a registration number, get it. If it needs an audit, book it. If it needs both, do them in the order the program specifies. Then install. The paperwork is not glamorous, but it is what stands between you and the rebate.

A free assessment is the right place to do this, because the assessor checks your exact eligibility — your heating type, your income band, your home type, and the current requirements of each program — before you spend anything. That is the point of the assessment: to confirm the numbers while they can still change the plan.

The mistakes to avoid

The most common ones are all order mistakes. Installing before registering. Assuming the rebate is automatic. Assuming the amount on a website from last year is still the amount today. Forgetting that a condo has a different federal cap. And the quietest one: not checking whether the program you are counting on is still open, because programs change and the amounts move.

None of these are hard to avoid. All of them are hard to fix after the install.

The takeaway

The rebate is real money, and the way to keep it is to follow the order: work out what you are replacing, check your income band, check the federal side and the home type, register or book the audit, and only then install. Get the order right and the estimate holds. Get it backwards and the most expensive part of the job — the equipment — is already in the wall.

If you want the numbers for your own home, start with a free assessment. We will confirm your exact eligibility and the amounts that apply to you before you sign anything. Our calculator currently links to the Feli rebate guide, which walks through the same steps, and the assessment is where the figures get confirmed for your house specifically.

Figures here are planning estimates from our rebate model — BC base by heating type, income top-up (BC total capped at $9,500), federal amounts, and the municipal/utility top-up. Your confirmed eligibility and amounts are verified during a free assessment, before you sign anything. Get my free quote and eligibility check →

Need a price, not just an article?

Tell us the product, quantity, and city — we reply with a free quote, usually the same business day.

📞 Call Evan Rebate Calculator